Klarstein 10027905 Manual Del Usuario página 15

Step 2
Remove the food processor bowl cover from the
food processor bowl by rotates it anti-clockwise.
Place the food processor bowl onto the food
processor connector ensuring that the arrow in
the bowl is aligned with the arrow on the con-
nector, hold the bowl and turn the connector
clockwise until it locks into position.
Step 3
Place the cutting plate onto the connector dri-
ver. You chosen cutting side must be uppermost.
Handle the cutting plates with care, they are ext-
remely sharp. Hold the plates by the centre grip.
Fit the food processor bowl cover onto the bowl,
so that the arrow is aligned with the circle. Turn it
clockwise, so the arrow is aligned with the arrow.
NOTE:
If you experience difficulty in fitting the lid, re-
move the attachment and switch on the mixer
briefly. Refit the attachment.
15