Flamelux PARIS Manual De Propietario página 6

Step 2
C
Step 3
270 mm
A
D
IMPORTANT INSTRUCTIONS
Install wall plugs (C) into wall.
1. Drill 4 holes (8 mm diameter, 4 mm deep) on the wall.
2. Insert wall plugs (C) into the drilled holes.
3. Please refer to the diagram for hole locations.
4. Both top holes should be located at least 420 mm away
from the ceiling.
Note: Before drilling into walls, always check that there
are no hidden wires, pipes, etc. Make sure that screws
and wall plugs supplied are suitable for supporting the
unit in your wall material. Consult a qualified person if you
are not sure.
Attach hanging bracket (A) into wall.
1. Holding the hanging bracket (A) to the drilled holes,
insert screws (D) through the second & fifth holes on the
upper and lower hanging bracket.
2. Attach the hanging bracket (A) in place with a Philips
screwdriver.
3. The screw should be fully inserted, flush to the wall in
order to avoid the screw head protruding over the bracket.
4. Ensure the hanging bracket is securely attached.
E-5
ASSEMBLY INSTRUCTIONS