Home Decorators Collection 16648 Guía De Uso Y Cuidado página 6

Installation (continued)
3
Connecting the wires
Strip 3/4 in. of insulation from wire ends.
Connect the black live wire from the
wire from the outlet box and the white neutral wire from the
(A) to the white wire from the outlet box. Twist the
stripped ends together with pliers.
Loop the bare copper ground wire from the
under the head of the green ground screw (CC) on the mounting
bracket (AA), and connect it to the ground conductor from the
supply circuit.
Cover the wire connections with the wire connectors (GG). Tape
the wire connectors (GG) and wires together. Carefully position
all wires inside the outlet box.
NOTE: The black live wire is labeled and marked
"Black live wire/ Cable negro vivo," the white
neutral wire is labeled and marked "White neutral
wire/ Cable blanco neutral." The bare copper
ground wire from the canopy is also labeled and
marked "Bare copper ground Wire/ Cable de
cobre desnudo a tierra."
Attaching the fixture body to the
4
outlet box
P lace the re body (A) over the outlet box, let the threaded
tube (BB) come through the hole of the
tighten t nial (HH) to the protruding threaded tube (BB) on
mounting strip (AA) until the
against the ceiling.
Hook the 6 bead crystal strand (B) to the finial (HH).
ody (A) to the black
(A)
body (A), then
ture body (A) is he mly
6