Care And Cleaning; Troubleshooting - Home Decorators Collection 16648 Guía De Uso Y Cuidado

Installation (continued)
5
Installing the light bulbs
Install the light bulbs (II) (included) into the sockets. Use four
60 W G9 base xenon bulbs.
NOTE: Use only Max 60W type G9 xenon bulbs. DO
NOT use type G9 halogen bulbs without a shield. Do not
touch the G9 xenon bulbs with bare hands at any time.
A pair of white gloves has been included for installation
as oil from the skin may damage the bulb.

Care and Cleaning

Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
To clean the xture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly
dampened, clean cloth to wipe the exterior surfac

Troubleshooting

Problem
The lights will not turn on.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
Possible Cause
The bulb is burned out.
The power is off.
There is a faulty switch.
There is a faulty wire connection.
There are crossed wires, or the power
wire is grounding out.
Insert the aluminum rod to the
6
fixture body
Insert the aluminum rod (D) to t
Ensure the aluminum rod (D) to the vertical position of the
dy (A).
Repeat for the remaining 23 aluminum rods (D).
ture.
Solution
Replace the light bulb.
Ensure the power supply is turned on.
Test or replace the switch.
Check the wiring.
Discontinue use of the lamp. Check the wire connections.
Contact a quali d electrician or call the Customer Care
Service Team at 1-800-986-3460.
7
l P a e e s o c t n
ture body (A) as shown.
H O M D E P E T O C . O M H / O M D E
c a 1 t 8 - 0 0 9 - 6 8 3 - 6 4 f 0 r o u f t r e h
C E O R A O T R S
a r s s s i a t c n . e