jbc DME-A Manual De Instrucciones página 53

Working with Robots
Manage and monitor the station using a Robot system.
1. Connect the tool to the station port by means of the CHB-A Converter.
2. Connect your Robot system to the socket on the station (RJ12).
DB9-RJ12 Adapater available only if necessary (Ref: 0013772).
3. Enable the Robot option in the station settings and the notification will be displayed:
4. Set your Robot's commands according to the Robot Communication Protocol, available on the
website www.jbctools.com/jbcsoftware-menu-115.html.
Robot
Update the station software
1. Download the JBC Update File from
www.jbctools.com/software.html and
save it on a USB flash drive. Preferably
one with no other files.
JBC
Update File
Converter
Ref. CHB-A
RS-232
connection
2. Insert the USB flash drive to the station.
The icon
w w w.jbctools.com
Control
Unit
is diplayed while updating.
53