Installation Instructions; Programme Options; Factory Settings - Vectair QUADRASAN IPE Manual Del Usuario

UK

INSTALLATION INSTRUCTIONS

Programming Control Panel
Power button
(turns unit on)
PROG button
(adjust programming)
ENTER button
(accepts chosen option)
Determine the correct location for the dispenser corresponding to the
1
installation option selected (A, B, C, D, E, F).
Open dispenser. Fit the dispenser to the wall (A1, B1) and make the
2
appropriate pipe work connections (i, ii, iii, iv).
3 Insert x 2 "C" Cell alkaline batteries observing correct orientation.
Install a Quadrasan refill ensuring that it locates firmly in the unit. The
4
Quadrasan IPE dispenser is designed to operate only when a refill is in place.
Press power button Display will appear in LCD screen.
5
If factory settings are satisfactory no further action is required.
6
For custom programming press PROG button and follow programming
7a
sequence using ADJUST
button to confirm options selected.
7b Or go to rental options.
When programming is complete LCD screen will scroll through all options
selected. To review selected options press and hold PROG button for 5
8
seconds.
In normal operation LCD screen displays time to next spray.
9
Replacing an empty refill with a new Quadrasan refill automatically resets the
10
system.

FACTORY SETTINGS

When batteries are replaced unit will revert to Factory settings.
12 Refills per year
24 hour operation
7 day operation
14
ADJUST
buttons
(scrolls through options)
RENT button
(switches unit to
rent mode)
buttons to scroll through options and ENTER
Zero Intensity Plus Event
Battery / Refill icons visible
Alarm on

PROGRAMME OPTIONS

Press PROG button for programme options. Important:
Quadrasan refill must be in place.
Select number of refills per year
6-12
Select current time, 24 hr clock
Select hours of operation per day
8-12-16-24
Set start time, 24 hr clock
Select days of operation 5-7
Set current day (5 or 6 day operation
only)
Select days off, 1 or 2 (5 or 6 day
operation only)
QUADRASAN IPE (Intensity Plus Event)
IPE provides increased fragrance up to 3 times per day to coincide
with known periods of heavy use.
Select number of Intensity Plus Events.
0-1-2-3
Set time of up to 3 IPE's
Select Battery/Refill icons ON/OFF
Select Alarm function ON/OFF
When programming is complete LCD screen will scroll through all
options selected. To review options, press and hold PROG button
for 5 seconds.
RENTAL OPTIONS
Rental mode can be selected to override any previous programme
options. 30,45 or 60 day options can be selected by pressing
RENT button at any time. Pressing RENT button will scroll through
options, when correct option is displayed this remains for 4
seconds and then reverts to Next Spray countdown.
UK
15