Operating Modes; Mode Button - Predator 35 Manual Del Usuario

OPERATING MODES

1- ON / OFF BUTTON
a. Connect to the power supply. Press the ON/OFF button. The indicator light
comes on and the unit will start to operate with the default Low Speed set-
ting.
b. Press the ON/OFF button again to turn off the unit.
At standby mode, the display shows the room temperature, only ON/OFF bu-
tton and Trap button are valid.

2- MODE BUTTON

Natural Mode: Press the mode button once to select the Natural Mode,
the air cooler works between different wind speed.
Sleep Mode: Press the mode button twice to select the Sleep Mode, the
cooler continue works at low wind speed.
3- SPEED CONTROL
En el modo de trabajo Normal, gire la rueda en sentido horario para seleccio-
nar la velocidad del viento de baja a alta y en sentido contrario para seleccio-
nar la velocidad del aire de alta a baja.
4- COOLER BUTTON
If you press the COOLER button, the indicator light comes on and the unit
will start to pump up the wáter.
Make sure that the tank has wáter.
If water tank is empty but press the COOLER button, the cool indicator
light will flash with 3 times beeping sound.
5- TIMER BUTTON
Press the TIMER button, then press up/down buttons to select your prefe-
rred timer hour from 1-12 for automatic shut off setting by each press.
14