Premier SX-5264USBT Manual De Instrucciones página 38

"RESET"option in"Default", parental will restore to the initial status.
DEFAULT:
Choose "RESET"option, all menus will restore to the initial status.
TROUBLESHOOTING
If you experience the following problems while using the unit, this troubleshooting guide can help you.
NO SOUND
Check if the unit is connected securely.
Make sure you operate the TV or amplifier correctly.
NO IMAGE , IMAGE ROLLSAND NO COLOR
Check if the unit is connected securely.
Make sure you operate the TV correctly.
Make sure you set the color system correctly.
BAD SOUND QUALITY
Make sure the audio output mode is set correctly.
Make sure the audio connection between the unit and amplifier is right.
DISC CAN NOT BE PLAYED
There is no disc in the unit.
Insert the disc on the disc tray properly with the label side up.
Clean the disc.
Moisture has condensed in the unit. Remove the disc and leave the unit on for about one hour.
REMOTE CONTROL DOES NOT WORK
Remove barriers between the remote control and the unit.
Replace the batteries with new ones.
Point the remote control at the remote control sensor of the unit
Add specification of product
Add schematic diagram