Safety Instructions - Klarstein Hot Spot Crystal Flow Manual Del Usuario

EN
22

SAFETY INSTRUCTIONS

• Read all instructions before using this unit.
• Do not leave this unit unattended when in use.
• This heater will get hot when in use. Do not touch hot surfaces.
CAUTION
Risk of burns! Some parts of this product can become very hot and
cause burns. Particular attention has to be given when children and
vulnerable people are present.
• The heater must not be located immediately below a socket-outlet.
• Do not move the unit when in use. Wait until the heater is completely cool before
moving and check that it has been unplugged from the power supply.
• Position the unit at least 1 m away from highly combustible materials such as
furniture, trees, leaves, dry grass and bushes.
• The heater must not face with the heating element pointing upwards towards a
ceiling. The heater element must be facing the area it is to heat.
Note: In order to avoid overheating do not cover the heater. It is not for drying
clothes.
• Keep children and pets at a safe distance from the unit.
• This heater can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
heater in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by children
without supervision. Children of less than 3 years should be kept away unless
continuously supervised.
• Children aged from 3 years and less than 8 years shall only switch on/off the
heater provided that it has been placed or installed in its intended normal operating
position and they have been given supervision or instruction concerning use of the
heater in a safe way and understand the hazards involved. Children aged from
3 years and less than 8 years shall not plug in, regulate and clean the heater or
perform user maintenance.
• Do not operate the heater if any signs of damage or malfunction manifest
themselves.
• Do not attempt to repair or adjust any electrical or mechanical functions on this unit.
The unit does not contain any user serviceable parts. Only a qualified electrician
should perform servicing or repairs.
• If the power cable is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard. Do not replace or
attempt to replace the element in this product.