Better Homes and Gardens Ellis BH48-084-099-46 Serie Manual Del Usuario página 5

6
6
4
Small Wood Dowel
(2 used in this step)
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Insert two Small Wood Dowels (4) into the inner holes of the Drawer Back Panel (Q) at both ends. Tap
in with a rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of
all dowels. NOTE: It is very important to use a small amount of glue on both ends of dowels.
3. Fasten the Drawer Back Panel (Q) between the Drawer Left and Right Side Panels (O and P) with four
38 mm Screws (6).
Drawer Assembling
P
④
Q
4
M4 x 38 mm Screw
(4 used in this step)
5
O
6
6
⑥