Sveon SPM200 Manual De Usuario página 22

10.4 File Copy
This function allows you to copy files between the different external storage units connected to the unit and also through
a network (if you want to copy files through a network please complete the setup of the network functions). Follow these
steps:
1. Select "File Copy" option from the Main Menu and then press "Enter" button of the remote control.
2. Go to "Source" section located in the left of the screen, select the location where is saved the file/folder you want to copy.
In "Destiny" section select the unit where you want to copy the file/folder. Press "Enter" button of the remote control.
3. When you select a section ("Source" or "Destiny"), the content of this storage unit is displayed. In "Source" section ex-
plore the files until select the file you want to copy: select it, press "File Select" button of the remote control and the file
will be marked with "√". Press the right arrow button ( ) to select the folder where you want to copy the file.
4. After selecting the destiny folder to copy the file or folder, press again the righ arrow button ( ) and these options will
be displayed: "Copy", "Move" and "Cancel". Select "Copy" if you want to create a copy of the file or folder; select "Move"
if you want to move the file or folder from the source unit to the destiny unit; press "Cancel" if you want to exit. Wait until
copy process finishes.
5. When the copy process finishes press "OK" to go to the Main Menu and explore the files. Press "No" to go to "Copy"
menu.
6. If you have selected a file or folder and you want to disable this selection, go to the file or folder and press again the
button "File Select". The mark "√" will dissapear.
7. If you want to copy the file in a new folder, go to "New Directory" and press "Enter" button of the remote control. A virtual
keyboard will appear to enter the name of the new folder and then you can select it as a new destiny to copy files or fol-
ders.
10.5 Setup
Select this option to setup the preferences of the unit. Press "Enter" button of the remote control to choose the options you
want to change. Press "Return" to go to the previous screen.
In "Setup" menu you will find the following options:
Movie
- Aspect Ratio: choose the TV screen format:
· Pan Scan.4:3: Select for 4:3 format TV screens
· Form. cine 4:3: Select this option to adjust a wide format to a 4:3 TV screen.
· 16/9. Select this option the format of your TV screen is 16/9.
- Brightness: Select to adjust the brightness level.
- Contrast: Select to adjust the contrast level.
- DNR (Digital Noise Reduction): Select "Automatic" if you want the device improves the quality of the pictures or "Disable"
if you want to use this function.
- TV System: Select the output resolution between these options: HDMI Automático, NTSC, PAL, 480p, 576p, 720p 50HZ,
720p 60 Hz, 1080i 50Hz, 1080i 60Hz, 1080p 50Hz, 1080p 60Hz.
*If you have select HDMI output please make sure the HDMI cable between the unit and your TV screen is properly con-
nected before changing the output resolution.
Audio
- Night Mode: Select to dicrease automati-
cally the audio signal volume.
- Digital output: Select the digital audio out-
put between: HDMI LPCM, HDMI RAW ó
SPIDIF LPCM, SPDIF RAW.
SPM200 User guide
Index
1. Welcome
2. Features
3. Content
4. Hardware
5. Remote Control
6. TV Connections
6.1 AV Connection
6.2 YPbPr Connection
6.3 HDMI Connection
7. USB device connection
8. Playback from card reader
9. First time usage
9.1 Starter Screen
10. Main Menu
10.1 Movie
10.2 Music
10.3 Photo
10.4 File Copy
10.5 Setup
11. Basic operations
12. Network functions
12.1 Wireless LAN Connection
12.2.1 Infraestructure (AP)
12.2.2 Point to Point (Ad Hoc)
13. Files sharing
13.1 Windows XP
13.2 Windows Vista
13.2.1 Mode 1
13.2.2 Mode 2
14. File access through the network
14.1 My Shortcuts
14.2 My Neighbors
15. Firmware upgrading
16. FAQs
English 22