Allsteel AWARE Instrucciones De Instalación página 6

AWARE BUFFET CREDENZA
Failure to install product as instructed, use of hardware other than that which is provided, or failure to comply
with instructions can result in product failure, personal injury, or property damage.
AV INSTALLATION
Face of A/V rack
and back face of
fixed shelf.
Fixed base shelf.
Secured to base
with 3 screws.
Step 2:
Center the A/V Rack on the fixed shelf and align the back face of the AV rack with the back face of
the shelf.
Step3: Holding the A/V rack flush to the back of the shelf, slide the movable portion of the A/V rack
forward, exposing the mount holes. Reference the AV rack instruction sheets for which holes to use.
Danger! Make sure the door of the bay where the rack is being installed is fully open when
sliding the movable portion of the A/V rack forward to expose the mount holes.
Step 4: Secure A/V rack to fixed shelf with No. 8 Phillips round washer head self drilling screws at
all hole locations on the A/V rack.( SCREWS NOT PROVIDED)
Pages 6 of 9
W A R N I N G
Screws
Installation Packet
343-3770