Allsteel AWARE Instrucciones De Instalación página 8

AWARE BUFFET CREDENZA
Failure to install product as instructed, use of hardware other than that which is provided, or failure to comply
with instructions can result in product failure, personal injury, or property damage.
LEVELING THE UNIT
Step 1: Place a level on the unit to determine if it is level.
Step 2: Locate the glides.
- Glides are located underneath the left and right hand fixed shelf and the removable center shelf on
a 72" wide credenza.
- A 72" wide credenza comes with 6 glides (two per bay) while a 48" wide credenza comes with 4
glides (two per bay).
Step 3:
Access the front glides through the access hole on the fixed shelf closest to the end-panel. See illus-
tration below.
Back glides are accessible through the unit or by removing the removable back of the credenza.
Step 4: Adjust the doors.
Doors can be adjusted up or down, left or right and forward or backwards through the hinges. Adjust
doors with a screwdriver until desired results are achieved.
Step 5: Check the level to evaluate that the unit is leveled.
Credenza end panel
Pages 8 of 9
W A R N I N G
Fixed
shelf
Glide access hole
Installation Packet
For side to
side leveling
For up and
down leveling
For in and out
leveling
343-3770