Infiniton CMPT-STL6T5 Manual De Usuario página 13

⚫ We recommend that at least two people install this hood.
⚫ The lights on this appliance should only be used during operation of the cooker
hood. They should not be left on permanently and used as a lighting source.
IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
1） Remove the metal grease filters.
2） Position the hood against the wall that you are
intending to install it and mark the position of
the support holes that are to be drilled .
3） Using a drill bit with an 8 mm diameter, make holes
in the wall on the positions that you have marked in
step 2, and insert raw plug into the holes that you
have drilled.
4） Screw the hook into the wall at Hole B.
11