Metra 99-8158G Instrucciones De Instalación página 4

Radio Trim Panel Assembly
1. Attach (2) chrome trim pieces and (4)
clips removed in dash disassembly to
kit panel. (Figure A)
ISO DIN head unit provisions
1. Mount the radio to the brackets with
screws included with unit. (Figure A)
2. Mount the radio brackets to the pocket
with the screws supplied. (Figure A)
3. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
4. Mount assembly into the sub dash.
5. Reassemble dash in reverse order of
disassembly using 99-8158G trim panel
instead of factory panel.
Kit Assembly 99-8158G
4
(Figure A)
(Figure A)