Playback Mode; Deleting Images; Viewing Images On A Tv - Veho Smartfix VFS-014-SF Manual De Instrucciones

English
Please note: To save power, the Veho Scanner will go to sleep mode after 3 minutes of being
inactive. You can come out of sleep mode by pressing any button on the scanner.
If the Veho Scanner is inactive for 6 minutes, it will turn off automatically.

7. Playback mode

1. You can use Playback mode to view the images that you have scanned onto the SD card.
2. Press the Playback button to enter playback mode:
3. Press the Up or Down button to change the selected image.
4. Press the playback button again to enter slideshow mode.
5. Press the Playback button again to go back to scanning mode.
8

8. Deleting images

1. Enter Playback mode, then select the image you want to delete.
2. Press the Delete button once, then Okay to delete the selected image.
3. Press the Delete button twice, then Okay to delete all images.
4. Press the Delete button three times then press the Okay button to format the SD card.
Please note: formatting the SD card will remove all files from the SD card, not just the images
saved by the scanner.
9. Connecting the scanner to a computer.
1. Plug the USB cable into the rear of the scanner and to a USB port on the computer.
2. Press the Power button to turn the scanner on.
3. Use the Up or Down button to select Yes or No and press Okay.
4. Select Yes to view the files on your computer, the SD card will appear as a removable disc
in "My Computer" or "This PC" for Windows users or on your desktop for Macintosh users.
5. Select No to use the scanner to scan slides/negatives while charging from a USB port.

10. Viewing images on a TV

The scanner is compatible with Mac and Windows operating systems, allowing you to copy the
files directly from the SD card in the scanner without using a USB card reader. There is no
software included or required to use the scanner on either operating system.
1. Set the TV to the correct input, and then connect the scanner to the TV using the 3.5mm
jack to yellow RCA cable.
2. Turn the scanner on.
3. Press the Playback button.
4. Use the Up or Down button then the Okay button to select PAL or NTSC to match your region.
5. Press the Up or Down button to change the selected image.
6. Press the Playback button again to start a slideshow. You can use the Up or Down button
to pause a slideshow, then press the Playback button to resume the slideshow.
11. Safety information and specifications
Specifications
Image Sensor
Preview and Review
Lens Specification
Color Balance
Exposure Control
English
1/2.33" 14 Mega CMOS Sensor,
2.4" Color LCD Display
F=4.8, f=12.95mm
Automatic
Automatic & Manual adjustment
9