FoodSaver V3240 Guía De Referencia página 6

How to Make a Bag from a
FoodSaver Vacuum Sealing Roll
®
1. Open the appliance door and place the roll into the Roll
Storage Compartment (Fig.1). For Best results, insert
the roll with material flap down. Note: Bags can be
sealed with the appliance door either open or closed.
2. Lift up the Roll Cutter Bar and place bag material
beneath the cutter bar (Fig.2).
3. Pull out enough bag material to hold the item being
vacuum packed, plus 4 inches (10 cm). Lower the
Cutter Bar and slide the Roll Cutter across the Cutter
Bar (Fig.3).
4. Lift Bar, place bag over sealing strip, gently
lower bar, press Seal button. Once red light
goes off, lift bar and remove bag (Fig. 4).
5. You now have one sealed end.
6. Now you are ready to vacuum seal with your new bag
(Fig. 5).
All manuals and user guides at all-guides.com
www.foodsavereurope.com
Fig. 1
Fig. 2
4"
Fig. 3
Fig. 4
Fig. 5
5