Operation Instruction - DesQ 86327 Informacion De Producto

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Operation instruction

1
a Quick release plate
a
b Locking lever
e
c Lock knob for tilt
d Lock knop for pan
e Positioning handle
f Center column lock knob
g Bubble level
h Handle
i Brace lock knob
j Supporting brace
k Lever lock
i
l Non-slip rubber feet
j
2
ANGLE ADJUSTMENT SYSTEM
k
3
TAKE OUT QUICK RELEASE PLATE.
Release the locking lever 'b' to take out quick release plate 'a' out.
l
4
FIX THE EQUIPMENT ON THE QUICK RELEASE PLATE.
m
Securely fasten your camera with the fixing knob to the panhead.
5
ASSEMBLE QUICK RELEASE PLATE
Put the quick release plate 'a' with equipment on the panhead, then lock the lever 'b'.
6
CENTER COLUMN ADJUSTMENT
To elevate the panhead, unlock center column lock knob 'f', then lift the desired height and lock the knob 'f'.
7
LEG ANGLE ADJUSTMENT
Loosen the brace lock knob 'i', push the brace up until the legs are at a proper angle. Lock the brace lock
knob 'i'. When the braces are horizontal, the tripod legs are at a maximum spread and the tripod is in its
most stable position.
8
LEGS EXTENTION
Release the locking lever 'k'. Then extend and shorten the legs until desired tripod height is attained.
Lock into position height by tightening 'k'.
MONOPOD EXTENSION
9
Release the leg lock by twisting the lock until loose. Then extend and shorten the legs until desired height
is attained. Lock into position height by tightening 'm'.
HEIGHT ADJUSTMENT
10
For greater stability of your tripod: When increasing height of the tripod, extend the leg sections
successively from the top down. Begin with the section closet to the canopy and work your way down
until the desired height is attained.
11
ATTENTION
When moving from place to place, please ensure you detach your camera from the tripod, otherwise
movement could cause your camera to detach and fall.
For prevention of damage to the tripod and your equipment, do not use the tripod in hazardous weather
conditions or on unstable ground.
DESQ International is not responsible for damage to your camera and equipment incurred while using the tripod.
4
c
a
g
f
k
l
e
b
d
h
i
j

Publicidad

Tabla de contenido
loading

Tabla de contenido