Cleanfix R 44-120 Manual Del Usuario página 9

Read these instructions carefully before operating the machine!
Correct use
Correct use also includes adherence to the operating, servicing and maintenance
●
conditions recommended by the manufacture.
The relevant accident prevention regulations as well as all the generally acknowledged
●
safety and working practices must be followed.
Unauthorized modifications to the machine exclude the manufacturer's liability for
●
resultant damage.
Before machine use, floorcoverings must be tested for suitability for this cleaning
●
process.
Pay attention to the area compression of point-elastic floors, e.g. in gymnasiums.
●
The manufacturer accepts no liability for damage to equipment and to the floor being
●
cleaned from using the wrong brushes and cleaning agents.
Product liability
The operator's attention is drawn explicitly to the fact that the machines may only be used
for their intended purpose. If the machines are not used for their intended purposes, the
user must accept full respon-sibility. Any liability of the manufacturer ist thus excluded.
Sources of risk
When the machine is stationary, the brush unit must be immediately switched off to
●
prevent damage to the floor covering.
During transportation in lifts, the currently valid user instructions and safety regulations –
●
and particularly those concerning maximum loading – must be observed.
Machine operation position
The machine operation position is behind the machine.
●
Admitted maintenance personnel
The single-disc machine may only be serviced and repaired by per-sons with technical
●
and legal authorization.
Cleaning agents
When using cleaning and care agents, the manufacturer's danger warnings must be
●
followed and protective goggles and clothing must be worn.
Only muse low-foaming, non-combustible cleaning agents which do not contain
●
generally health-hazardous substances.
Explicit reference is made to the risks of using highly flammable, com-bustible, toxic,
●
health-hazardous, corrosive or irritant substances.
Initial operation
Delivery, instruction on safety procedures, handling and maintenance and initial
●
operation are generally carried out by our authorized specialist.
If this should not be the case, the operating company will be responsible for the
●
instruction of the operators.
English 7a