1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Side Frames (B and C) using a
Phillips screwdriver.
NOTE: Screw-in cam bolts must be screwed down flush.
3
3. Glue the Wood Dowels (3) into the inner holes of the Bottom Shelf (F) and Shelf Supports (G) as shown
NOTE: It is very important to use a small amount of glue on both ends of dowels.
Assembly Instructions
B
3
C
F
G
3
5
3
3
3
X2
3