Safety Warnings - Marmitek PROGUARD800 Serie Modo De Empleo

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures
or bright light sources.
• In case of improper usage or if you have altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage other
than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product.
Wrong positioning can cause an explosion.
• Automatic switching devices provide comfort, but can also be dangerous. They
can surprise people or can ignite clothing hanging over an electric heat source.
Please be careful and take appropriate measures to avoid accidents.
INTRODUCTION
This product is a part of the
Marmitek ProGuard800 series,
and operates together with the
ProGuard800
When you wish to know more
about the complete system, its
possibilities and its settings, then
you can check
installation manual
www.marmitek.com.
All of these sensors implement a
feature to combat the problem of
multiple transmissions,
drastically reduce the life of the
batteries. After each transmission,
there is a four-minute delay during
which further transmissions will not
be sent.
The MS845 are designed for
installations prone to nuisance
alarms caused by pets or small animals.
MS845
alarm system.
out the
or visit
which
Mounting
Hole
Battery
Holder
Tamper
Switch
DIP-
Switch
Vertical
Adjustment
Scale
Figure B.1: PIR Sensor with Cover Removed
LED
Indicator
Easy
Lock
Mode
Jumper
Antenna
Pyro
Sensor
2