M AX I M U M R E C O M M E N D E D W E I G H T L O A D S
MANUFACTURER: Whalen Furniture Manufacturing
TM
CATALOG: 3-in-1
MODEL # MS17-D4-1011-03
MADE IN CHINA
FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND
WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL
TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF THE
UNIT; THE BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING
SURFACE OF THE UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY
POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT
EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT,
CAUSING POSSIBLE SERIOUS INJURY.
G E N E R A L I N F O R M A T I O N , T I P S a n d T R I C K S
1. Please read the Assembly Instructions prior to assembling this product.
2. Remove all hardware from the box and sort by size.
3. Check to see that all hardware and parts are present BEFORE assembling.
4. Ask a friend to assist you with the assembly of this furniture.
5. To avoid damage, assemble the product on a sturdy, level and protective surface.
6. Please wait until all steps are completed before fully tightening Bolts.
7. Make sure all Bolts are tightly fastened before the unit is used.
This product is sold with one set of Tipping Restraint Hardware Kit. You must install the
Tipping Restraint Hardware between the wall and the TV stand to prevent any accidents or
damages. When properly installed, this restraint can provide protection against the
unexpected tipping of the unit due to small tremors, bumps or climbing. The restraint is only a
deterrent and is not a substitute for proper adult supervision. Use of tip-over restraints may
only reduce, but not eliminate, the risk of tip-over.
TV Stand
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH
FITS UP TO MOST 177.8 cm / 70 in FLAT PANEL TVs
MAXIMUM LOAD 61.2 kg / 135 lb
FITS UP TO MOST 177.8 cm / 70 in FLAT PANEL
TVs WITHOUT SWIVELING BRACKET
MAXIMUM LOAD 61.2 kg / 135 lb
PLACE TV BEHIND THE STOPPER
MAXIMUM LOAD 22.6 kg / 50 lb
2