Mechanical Installation; Place Of Installation And Machine Positioning; Observations Relating To Installation - AERMEC TRS 1001DX Manual Del Usuario

MECHANICAL INSTALLATION

PLACE OF INSTALLATION AND MACHINE POSITIONING

1. Make sure the support surface can withstand the weight of the machine(s)
without causing any vibration.
2. Make sure the support surface is perfectly horizontal to ensure the various sec-
tions are properly coupled.
3. Do not place the unit in rooms where there are flammable gases or acid/ag-
gressive/corrosive substances that may damage the various components be-
yond repair.
4. Ensure there are sufficient technical clearances to enable not only installation
but also maintenance and the replacement of components such as coils, filters,
etc.
5. In the case of suspended machine installation, there must be a ceiling hook-up
system for each of the sections that make up the unit.
Model (A)
TRS1001DX 1215

OBSERVATIONS RELATING TO INSTALLATION

Fresh air intake
Minimum false ceiling height (B)
450
External fresh air duct
Exhaust air
Insulating
FAILURE TO RESPECT THE MINIMUM TECHNICAL CLEARANCES MAY MEAN THE
MACHINE COMPONENTS ARE INACCESSIBLE, MAKING IT IMPOSSIBLE TO CARRY
OUT MAINTENANCE.
Fresh air duct
Suspension bar
Return air duct
Return air
Exhaust duct
Delivery air
27