Accumulation Check; Pre-Set Tare; Parameters Setting; Zero And Baud Rate Setup - Gram C6 Serie Manual De Utilización

Accumulation check

In statistics printing mode, press

Pre-set Tare

Press key , it displays [p 0], input tare value like 879kg, then press

PARAMETERS SETTINg

Zero and baud rate setup

to enter into parameters setting and input "18", then press
1. Press
2. The display will show (f1
means 0%", "1 means 2%", "2 means 20%", "3 means 50%", "4 means
100%". Select the desired option and press
next parameter.
3. The display will show (f2 2): Zero function range of power on, choose
"0 means 0%", "1 means 4%", "2 means 50%", "3 means 100%". Select
the desired option and press
4. The display will show (f3 05): Zero-tracking range, choose "5 means
0.5e", "10 means 1e", max is "20 means 2e", then press
and go to next parameter.
5. The display will show (f4 4): Baud rate of wireless, choose "1 means
600bps", "2 means 1200bps", "3 means 4800bps", "4 means 9600bps",
then press
6. The display will show (f5 4): Baud rate of RS232, choose "1 means
600bps", "2 means 1200bps", "3 means 4800bps", "4 means 9600bps",
then press
1): Zero function range setup, choose "0
to confirm and go to next parameter.
to confirm.
and check the total weights.
to confirm and go to
to confirm and go to next parameter.
.
.
to confirm
9