StarTech RK619WALLV Guia De Inicio Rapido

6U 19in Steel Vertical Wall Mount Equipment Rack Bracket
Product Diagram (RK619WALLV)
2
1
Component
1 Cage Nut Holes
2 Mounting Holes
Package Contents
Vertical Wall Mount Bracket x 1
•
M5 Cage Nuts x 16
•
M5 Screws x 16
•
Wood Screws x 6
•
Quick-Start Guide x 1
•
Requirements
For the latest requirements, please visit
(Optional) Cage Nut Tool
•
Phillips® Head Screwdriver
•
Equipment 1U - 6U
•
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Function
Secures the equipment to the Wall Mount
•
Bracket.
6U of rack mounting space.
•
6 Mounting Holes, secures the Wall Mount
•
Bracket to a Mounting Surface.
The Wall Mount Bracket can be mounted
•
vertically or horizontally.
www.startech.com/RK619WALLV
Mounting the Wall Mount Bracket
Notes: Product mounting should be completed by a certified professional as per the
local safety and building code guidelines.
Mounting structures vary, and it's important to make sure that the type of structure
and mounting hardware that you're using will properly support the mounted
equipment. Failure to do so may result in personal injury and/or equipment damage.
Make sure the Mounting Surface is sturdy enough to support the weight of the
1.
Wall Mount Bracket and installed equipment combined, 200 lb. (90 kg).
Test fit the Wall Mount Bracket to the Mounting Surface to ensure a proper fit
2.
Using a Writing Utensil, mark the 6 Mounting Holes.
3.
Use the included Wood Screws (for wood surfaces only), to mount the Wall Mount
4.
Bracket to the Mounting Surface.
Installing Equipment
Insert the one side of the M5 Cage Nut into the Cage Nut Hole and apply pressure
1.
to the other side of the M5 Cage Nut until it snaps into place.
Repeat step 2 to install the second M5 Cage Nut into the Wall Mount Bracket.
2.
Note: If it is too difficult to install the M5 Cage Nuts by hand, use a Cage Nut Tool
(not included) to install the M5 Cage Nuts.
Align the Mounting Points on the Equipment with the M5 Cage Nuts on the Wall
3.
Mount Bracket.
Note: The number of Mounting Points may vary depending on the type of
Equipment. The Equipment may have more Mounting Points and may require the
installation of additional M5 Cage Nuts.
Insert the M5 Screws (included) through the Equipment's Mounting Points and
4.
into the M5 Cage Nuts.
Using a Phillips Head Screwdriver (not included), tighten the M5 Screws, being
5.
careful not to over-tighten.
Quick-Start Guide
Manual Revision: November 16, 2020 4:36 PM