Elari NanoPhone C Serie Manual De Usuario página 18

EN
All manuals and user guides at all-guides.com
User Manual
MicroUSB cable
MicroUSB cable can be used to charge the
phone, you also can charge the phone through
the wall charge-adapter (not included) or
through the charging wire by connecting it to
the PC (PC should be turned on). You can view
the charging progress on the screen. If the
phone is off, it will not turn on automatically
if connected to charger. You can long press
the "turn on" button to start the phone during
charging.
Earphones
Earphones use the standard 3.5mm earphone
plug, accessories do not include the ear-
phone wire.
Note:
when you dial the number or answer
the phone, please don't plug or pull out the
earphones.
Comments
• When the phone is in a crash state: all buttons
have no function, phone screen can't operate,
please use the equipped card needle to insert it
into the reset button port and press on it.
• Every NanoPhone C should be charged for
about 12 hours before using it for the first time
and at least 2 hours for further use.
• Standby time of NanoPhone C is up to 5 days,
talk time is up to 4hours. Actual standby time
18