Troubleshooting Before Calling For Service - LG PS-S200 Serie El Manual Del Propietario

Troubleshooting Before Calling for Service

Problem
Air Purifier will not
start.
Low air volume
Noisy operation
Air Purifier function
is not working well.
Owner's Manual
Possible Cause
Is the power plug unplugged?
●
Is the fuse disconnected?
●
Is the power shut down?
●
Is the front panel open?
●
Is the Sand Storm filter clogged?
●
Is there dust accumulated on the HEPA filter?
●
Is the indoor contamination severe?
●
Are there many particles on the Sand Storm filter?
●
Is the using location too spacey?
●
Are there any obstacles near the product?
●
Is the unit installed at a location where air flows freely?
●
Solutions
Plug the power properly.
●
Request service to the LG Electronics Service Center.
●
Re-operate the product after the power is reconnected.
●
When the front panel is open, the product will not operate.
●
Close the front panel properly.
Clean the Sand Storm filter well.
●
Replace the HEPA filter.
●
Ventilate the area to use the product.
●
Clean the Sand Storm filter.
●
Use the product that fits the room size.
●
(Avoid using it where it is ventilated well such as entrance,
window etc.)
Remove any obstacles.
●
Move and install at a different location.
●
25