Installation And Configuration; Unpacking The System - Dell PowerVault MD3200 Guía De Introducción

Installation and Configuration

WARNING:
instructions that came with the system.

Unpacking the System

Unpack your system and identify each item with the packing list that shipped
with your system.
Installing the Rails and System in a Rack
Assemble the rails and install the system in the rack following the safety
instructions and the rack installation instructions provided with your system.
NOTE:
To balance the weight load, it is recommended that you install the
PowerVault MD3200 series storage array at the bottom of the rack and the
PowerVault MD1200 series expansion enclosures above it.
6
Getting Started With Your System
Before performing the following procedure, review the safety