RECOMMENDED LOADS
• The pulsator rotates for
8 seconds to detect the
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and water
will be supplied.
Close the lid
• Water will be sup-
• When the wash
plied for 2 minutes
program ends, the
after the start of the
buzzer will ring
wash to supplement
for 10 seconds
the water the laundry
before the Power
has absorbed.
goes off
automatically.
Finish
Caution & Note
• If water is already in the tub, or
putting wet laundry into the tub
before starting will increase the
WATER LEVEL.
• With lightweight bulky loads,
WATER LEVEL can be set low.
• Changes to Water Temperature
(HOT/COLD) and wash level are
(refer to page 14)
possible during operation.
• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
• Washing with HOT water may
damage the laundry (Water is set
to cold automatically). Ensure that
the load is under 2kg.
• In order to avoid damage to
laundry,
the spin cycle may appear slow.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.
• When static pressure of water is
more than 2kg/cm
WASH course will be within
19min.
Maximum
Load
Less than
19.0 kg
Less than
2.0 kg
2
, the QUICK
Less than
2.0 kg
Less than
19.0 kg
Less than
19.0 kg
17