Assembly - HAMPTON BAY C526-62 Guía De Uso Y Cuidado

Assembly

1
Connecting the Back and Arms
□ Align the holes in the sides of the back (B) to the matching
holes on the insides of the arms (A).
□ Connect the back (B) to the arms (A) by inserting an M6x18
bolt (AA) and M6 washer (BB) through each of the four
holes in the back (B).
□ Do not tighten the bolts completely yet.
B
3
Tightening the Bolts
□ Make sure the bench stands straight and level with the
ground.
□ Tighten all bolts.
□ Cover all exposed bolts ends with the M6 caps (CC).
2
AA
BB
A
CC
5
Attaching the Seat
□ Place the seat (C) between the two arms (A), aligning the
matching holes.
□ Connect the seat and arms by inserting the other four
M6x18 bolts (AA) and M6 washers (BB) into the corners of
the seat (C) from the bottom and through the arms.
C
Please contact 1-855-HD-HAMPTON for further assistance.
A
BB
AA
CC
HAMPTONBAY.COM