HOMEDEPOT AD290 Manual De Instrucciones Del Dueño

Assembly and Instruction Sheet
Ornate Firebowl
Model: AD290
Important!
Please read and follow ALL instructions before assembling or using this
product, particularly the safety statements. Failure to follow instructions
and warnings could result in damage to property, serious injury or death.
WARNING!
• Outdoor use only. Never use in enclosed area. Use in
unventilated areas will endanger your life.
• Do not use this unit on or near combustible surfaces or
structures such as wood decks, dry leaves or grass, vinyl or
wood siding, etc.
• Use on level, non-combustible surface only.
• Keep away from all combustible materials including gasoline
and other flammable liquids and vapors.
• Never use flammable accelerants, such as: gasoline, alcohol,
paint thinners, kerosene, etc. to start a fire. Serious injury or
property damage could result.
• Screen lifting tool may become hot when in use! Failure
to wear protective gloves may lead to injury.
• Always wear fire-resistant gloves when handling hot
metal screen and lifting tool.
• Keep away from house, garage, balconies, or overhangs.
• Avoid using during dry or windy conditions.
• Keep out of reach of children.
• Do not overfill or use to burn leaves or trash.
• Exercise the same care you would with an open fire.
• Never leave unit unattended while hot or in use.
• Completely extinguish fire before leaving.
• Ashes can remain hot for a long time after fire is extinguished.
• Dispose of cold ashes properly.
• Any modification of the unit will void product warranty.
Contact local authorities regarding possible burn
restrictions before using product.
Parts Check List
Tools Required:
• Phillips Head Screwdriver
• Adjustable Wrench
Part # Quantity Part Description
A 1 Ornate Stand
B 1 Fire Bowl
C 1 Spark Screen
D 1 Stand Base
E 1 Screen Lifting Tool
F 1 Storage Cover
G 1 Spark Screen Handle
H 2 Bolt and Nut
I 1 Log Grate
B
A
D
C E
G
H
I
Check all parts for shipping damage:
Call us at (800) 230-6530 or email us: customerservice@asiadirectinc.
net if you have any problems or questions regarding this product.
Assembly Instructions
Step 1:
Carefully unpack all parts. Inspect for missing
parts or damage.
Assembly Instructions
Step 2:
Align holes of Stand Base (D) with the holes of Ornate Stand
(A). Insert bolt through each hole and attach nut to secure
pieces together (Figure 1 and 2). Tighten nuts with Phillips
Head Screwdriver and Wrench.
Step 3:
Place completed stand on level surface and insert Fire Bowl
(B) on completed stand. Place Log Grate in bottom of bowl.
Step 4:
Attach Spark Screen Handle (G) to Spark Screen (C) with
bolt (Figure 3).
Step 5:
Place screen on completed fire bowl (Figure 4).
Step 6:
You are now ready to use your outdoor fire pit on a level
non-combustible surface.
Please read and follow all Warnings and
safety instructions before using.
F
General Care
• Fire bowl may be cleaned with water and mild detergent.
• Do not use abrasive detergents or pads to clean surround or fire bowl.
• As with any outdoor grill, periodic maintenance is required to
return painted steel surfaces to original appearance. Remove any
rust with sandpaper or steel brush and repaint with grill paint suitable
for high-temperature surfaces. Follow manufacturer's instructions.
(cont.)
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5
Customer Service
Please contact us if you have any problems or questions regarding this product.
Toll Free: (800) 230-6530, M-F, 9 a.m. - 5 p.m. EST.
Email: customerservice@asiadirectinc.net
Visit us online at: www.asiadirectinc.net
AD290OM (7/08)