Resumen de contenidos para Bush Business Furniture DMR A171907A
Página 1
ASSEMBLY INSTRUCTIONS 60" WIDE TALL OVERHEAD RISER Lot Code # NEED HELP? Call 1−800−950−4782 www.bushbusinessfurniture.com Part Number A171907A Keep manual for future reference.
IMPORTANT SAFETY INFORMATION A171907A WARNING Attach hutch as described in the assembly instructions. Improper hutch attachment could cause instability, product collapse, and/or WARNING serious injury. This hutch is intended to be Conecte la alacena según es attached to base units that are descrito en las instrucciones de interconnected.
Página 4
FASTENERS /HARDWARE A171907A Fasteners are shown in actual size. los fijadores son demonstrados en su tamaño actual. les attaches sont montrées dans l'échelle grandeur. [ 10 ] H23370 #10 x 1-1/4" [ 2 ] H38022 KD Bolt [ 2 ] H147659 Grommet [ 2 ]...
Página 5
MODEL SPECIFIC A171907A 22HRT60MR 22HRT60AC [ 18 ] H171231 [ 18 ] H171234 Cover Cap Cover Cap 22HR60MC 22HRT60CS [ 18 ] [ 18 ] H146965 H146969 Cover Cap Cover Cap...
Página 6
ATTENTION A171907A Common assembly techniques. Técnica común de ensamblaje. Techniques communes d’assemblage. −Panel to panel attachment. −Fijación de tablero con tablero. −Fixation d’un panneau à l’autre...
Página 7
A171907A STEP CAUTION , hutch can not be repositioned, once set on work surface. Attachment procedure: -Clean surface with window cleaner and let it completely dry. -Remove release paper. -Align hutch as shown on next page(s) before setting it on work surface. -Once hutch is attached, tap firmly with hand to insure tape makes full contact.
Página 9
A171907A STEP An assistant is required. Es necesario un ayudante. Un assistant est nécessaire.
Página 10
A171907A STEP [ 2 ] An assistant is required. Es necesario un ayudante. Cover Cap Un assistant est nécessaire. Tilt at an angle and then install. Incline hacia un ángulo e instale. Inclinez à un angle et ensuite installer.
Página 11
A171907A STEP An assistant is required. [ 3 ] H23370 Es necesario un ayudante. Un assistant est nécessaire. #10 x 1-1/4" [ 6 ] Cover Cap...
Página 12
A171907A STEP [ 3 ] H23370 An assistant is required. #10 x 1-1/4" Es necesario un ayudante. Un assistant est nécessaire. [ 6 ] Cover Cap...
Página 14
A171907A STEP List of aproved mounting configurations. List del las configuraciones de montaje aprobades. Liste de configurations approuvées de montage. Hutch / Overhead La parte superior Huche / Stockage supérieur Work / Secondary surface Superfice de trabajo / Secundaria Surface de travail / Secondaire Hutch / Overhead Hutch / Overhead La parte superior...
Página 16
A171907A STEP Notice: Hutch cannot be moved after being set in place. Ensure alignment before setting hutch into final position. Attention: L'huche ne çeut pas être d éplacée après qu'elle ait été placée en place. Assurez l'alignment approrié avant d placer l'huche en positon finale. Aviso Atención: El aparador no puede ser movido después de ser fijado en su lugar.