Cleaning
The appliance is easier to clean if you do so immediately after use.
Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to
clean the appliance.
All detachable parts are dishwasher-safe.
Place the detachable plastic parts on the top tray of the dishwasher. Make
sure they are placed well away from the heating element.
1.Switch the appliance off, remove the plug from the wall socket and wait
until the filter has stopped roating.
2. Remove the dirty parts from the motor unit. Dissassemble the appliance
in the following order:
• Remove the pulp container;
• Remove the pusher;
• Open the clamp;
• Remove the lid.
3. Remove the juice collector together with the filter.(Fig.10)
4. Clean these parts with a cleaning brush in warm water with some
washing-up liquid and rinse them under the tap.(Fig.11)
5. Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rinse it under the tap.
Environment
Do not throw the appliance away with the normal household waste at the
end of its life, but hand it in at an official collection point for recycling. By
doing this you will help to preserve the environment.(Fig.12)
Troubleshooting
This chapter summarises the most common problems you could encounter
with your juice extractor. Please read the different sections for more de-
tails. If you are unable to solve the problem, please contact your customer
care centre in your country.