SIGLENT SSA3000X Guia Rápido página 11

Details of the Various Functions:
Frequency: Sets the Center Freq\Start Freq\Stop Freq\Freq Step
Span: Sets the Span\Full Span\Zero Span\Zoom In\Zoom Out\Last Span
Amplitude: Used to Set the REF Level\Attenuator\Preamp\Amplitude
Auto Tune: Automatically sets the optimal parameters according to the characteristics of the signal
BW: Used to adjust the RBW,VBW,VBW/RBW Rate, Average Type (Logpower\Power\Voltage)
Trace: Selects Trace\Trace setup\Trace math
Sweep: Selects the Sweep time\Sweep Rule\Sweep Mode
Detect: Selects the Detector type
Trigger: Used in Selecting the Free Trigger\Video Trigger\External Trigger
Limit: Sets the Pass\Fail Limit
TG: Sets the TG Level\TG Level offset\Normalize
Demod: Used to set the Parameters of the AM and FM
Marker: Used to Select the Mark Trace and Marker math
11