Premium Ambienti PPC1058D Manual De Uso Y Cuidado página 24

S/ Symptom
N
1 Lid does not
lock
2 Cannot open
the lid after air
exhaust
3 Air escapes
from the rim of
the lid
4 Air escapes
from the float
valve
5 The float will
not rise
Possible Reasons
The sealing ring is not
properly installed
The float is seized by the
push rod
The float is still up
Sealing ring was not
installed
Food residue on sealing ring
Sealing ring worn out
Lid not locked properly
Food stuck on the sealing
ring of the float valve
The sealing ring on the float
valve worn out
Not enough food and water
Air escaping from the rim of
the lid and the pressure limit
valve
Solutions
Reinstall the sealing ring
Push the rod with your hands
Press the float down
Install the sealing ring
Clean the sealing ring
Replace the sealing ring
Rotate the lid fully
Clean the sealing ring
Replace the sealing ring
Check recipe for proper quantity
Call the Consumer Service
Center