Jobe E-DUNA SUP Manual De Instrucciones página 14

WARNING
Make sure the Drive is inserted in the correct direction, otherwise the motor will propel you
BACKWARD instead of forward. Make absolute sure that the dedicated hole for the Drive is clean, with no foreign
objects, sand, or dirt.
WARNING The inflation hose may become HOT during the operation of the compressor. Handle with
caution and wait for hose to cool down before touching it. DANGER: Not following this instruction may cause
severe burns. After the inflation is completed, the hose will cool down on its own in a short period of time.
CAUTION: You MUST be present during inflation and monitor the process.
If for any reason you pump the board manually, use a pressure gauge to make sure the pressure is between 15
and 18 psi (1-1.2 bar).
WARNING
- While the compressor is activated DO NOT put your hand anywhere near the underside of the Drive
- The inflation hose MUST not be twisted or bent.
- Inflation MUST be monitored in all phases, making sure to turn off the on/off switch if
anything unusual or unexpected happens.
14