Care And Maintenance; Troubleshooting - Quoizel LWS3445E Manual Del Usuario

STEP 6:
a. Replace the fixture hood on the top of fixture body,
securing with lock screws.
Your installation is now complete! Restore electricity
and save this sheet for future reference.
Glass replacement:
Note: Place a cloth or towel on the ground under the
work area to prevent loss of mounting hardware if
dropped.
fixture hood
a. Remove lock screw,
body.
b. Remove the glass and add the replacement into the
same position.
fixture hood
c. Attach the
secure with lock screws.

CARE AND MAINTENANCE

Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean
fixture as they may damage the finish.

TROUBLESHOOTING

PROBLEM
Bulbs will not light.
Fuse blows or the
circuit breaker trips
when light is turned
on.
2018 QuoizelInc.
, glass from the fixture
back onto the fixture body and
POSSIBLE CAUSE
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
Crossed wires or power wire is
grounding out.
CORRECTIVE ACTION
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Check wire connection.
4
Fixture hood
Lock screws
Fixture body
Fixture hood
Glass Panels
Lock screws
Fixture body
Printed in China