Publicidad
Step 12
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D83 and D84).
å
Fasten a DRAWER RIGHT (35AC) to the DRAWER RIGHT SIDE (D83) and a DRAWER LEFT (35AD) to the DRAWER LEFT
å
SIDE (D84). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identifi cation.
å
NOTE: The glides are not intended to rotate.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
2
Page 16
Glide end
10A
1
D84
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D83
3S
419078
10A
2
www.sauder.com/services
Glide end
1
Publicidad
