Technical Data - Sime SV18 Manual De Instrucciones

T EC HN ICAL DA TA
Model
Part Code
Dimensioni collettore (H x L x D)
Frame material
Collector gross area
Collector surface area
Liquid content
Collector weight
Resistance to snow load
Resistance to wind load
The installation of this equipment must only be done by suitably qualified personel and according
to current regulations
The equipment must only be used for the purpose it was designed. It must be installed in
accordance with these instructions without being modified in any way.
The manufacturer and supplier decline all responsibility for injury or damage to persons, animals
or property that may arise from incorrectly installed equipment
Keep the panels covered until filled, do not fill panels that are hot.
If there is a risk of frost do not leave the panels and its hydraulic circuit filled with water, fill only
with a antifreeze solution.
For the filling use a mixture of 40% glycol and 60% water.
Refer to specific legislation on lightning.
For temporary storage before installation, store in a dry area protected from sunlight.
HY D RA ULIC RES IS T ANC E
SIME SV18
n° 8106248
mm 1990 x 1496 x 220
Aluminium
2
m 3,0
2
m 3,123
l 1,1
kg 48
2
kg/ m 57
2
kg/ m 142
Flow Pressure drop
(L/h)
0
50
100
150
200
250
300
(Pa)
0
91
256
494
806
1191
1650
19