Troubleshooting - THINK GIZMOS TG643 Manual De Usuario

2.3 Troubleshooting

If you are experiencing problems with your Excavator, here are some quick and easy checks
that you can carry out, which may help to resolve the problem.
No Response from the Excavator:
● Please ensure that the Excavator is in range of the controller and that there are no
obstructions between the controller and the Excavator which could block the signal.
● Make sure that the batteries in the Controller are fitted correctly and that they have not
reached the end of their life. If required replace the batteries in the controller.
Make sure that the batteries in the Excavator are fitted correctly. If required replace the
●
batteries in the Excavator.
● Please ensure that the power switch on the Excavator and Controller is switched to 'ON'.
The Excavator Starts to Run Slow:
● The batteries in the Excavator are running low, please insert new batteries.
6