Main Features - Palram IT-38 Manual Del Usuario

Main features

Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration
and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1200W(110V) / 2200W(220V);
Dual display window, be able to display measured
temperature and set temperature at the same time;
Temperature calibration;
Compressor delay protection for refrigeration control;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Heating/cooling differential function could be set
separately for refrigeration and heating to protect
temperature controller from violent change.
3.Specification
Temperature Control Range
Temperature Resolution
Temperature Accuracy
Temperature Control Mode
Input Power
Temperature Control Output
Buzzer Alarm
Sensor Type
Sensor Length
Relay Contact Capacity
Input Power Cable Length
Ambient Temperature
Storage
Dimension (Main Body)
Warranty
-50~120 °C / -58~248 ° F
0.1 ° C / 0.1° F
±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
On/Off Control, Heating and Cooling
100 ~240VAC, 50Hz/60Hz
Max. 10A, 100V ~240V AC
High and Low Temperature Alarm
NTC sensor (Including)
2m / 6.56ft
Heating (10A, 100-240VAC)
Cooling (10A, 100-240VAC)
1.5m ( 5ft )
-30~ 75 ° C / -22~ 167 ° F
Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity: 20~85% (No Condensate )
140x68x33mm (5.5x2.7x1.3 inch)
1 Year
2