Publicidad
Idiomas disponibles
Idiomas disponibles
Accessories which must be ordered separately, all accessories are sold as kits and include all necessary fixings.
Description
Side panels (2)
Hinged ventilated rear panel (1)
Transparent door (1)
Steel door (1)
Fan tray (1)
Ventilated top cover (1)
Cable tray (1)*
Panel mounts (2)*
Chassis supports (2)
Shelf (1)
Split gland plate (1)
Castors (4)
Earthing straps
40U 800x800 panel mount kit
* These items are sold in the same heights as the basic racks but
may be cut to different heights if required.
** Panel mounts for the 40U 800x800 rack are included with the panel
mount kit 582-704. This includes 4 panel mounts and associated
bracketry.
*** Cable trays are not available for the 12U and 21U rack cabinets,
however, larger cable trays may be cut to size for these cabinets.
Assembly of basic rack
1. Place the front frame on the floor and fasten the depth struts to the
frame using the M6x30 pozidriv™ screws and M6 washers.
Position the rear frame onto the depth struts and fasten using the
M6x30 pozidriv™ screws and M6 washers.
2. Position 6 of the M5 captive nuts into the slots in the vertical
sections of each upright members of the front and rear frames and
mount the adjustable depth members to the frames using the M5x8
pozidriv™ screws and M5 washers.
3. Fasten the panel mounts to the adjustable depth members using the
M5x10 pozidriv™ screws and M5 captive nuts.
4. Fit the adjustable feet into the inner four holes in the depth strut
through the foot mounting bracket already fitted to the lower depth
struts (see figure 2). The final foot height adjustment can be made
when the unit is standing vertically. If castors are required they
should be fitted now into the outer four holes in the depth struts.
The adjustable feet and castors may be used in conjunction as and
when required.
5. The plain top cover (supplied) may be fitted in two ways. It may be
fitted using the 4 M4x12 pozidriv™ screws which will enable the
cover to locate flush with the cabinet top. Alternatively, it may be
fitted using the 4 spacers and M4x25 pozidriv™ screws to raise the
cover above the top of the cabinet to provide ventilation for cooling
purposes.
Fitting optional accessories
Fan tray
1. The fan tray locates in the underside of the top depth struts and is
secured using the M4x8 taptite® screws provided.
Ventilated top cover
1. The ventilated cover replaces the plain top cover and fits flush with
the cabinet top using the M4x12 taptite® screws provided.
12U
16U
21U
600x600
600x600
600x600
220-658
582-114
220-664
220-670
582-170
220-686
220-737
582-322
220-743
220-715
582-271
220-721
220-692
582-221
220-709
582-401
582-401
582-401
582-372
582-372
582-372
***
582-574
***
220-759
582-518
220-765
582-495
582-495
582-495
582-467
582-467
582-467
582-439
582-439
582-439
582-552
582-552
582-552
582-568
582-568
582-568
-
-
-
27U
33U
40U
600x600
600x600
600x600
582-120
582-136
582-142
582-186
582-192
582-209
582-338
582-344
582-350
582-287
582-293
582-300
582-237
582-243
582-259
582-401
582-401
582-401
582-372
582-372
582-372
582-580
582-596
582-603
582-524
582-530
582-546
582-495
582-495
582-495
582-467
582-467
582-467
582-439
582-439
582-439
582-552
582-552
582-552
582-568
582-568
582-568
-
-
-
Steel doors, transparent doors and ventilated rear
panels
The doors may be fitted to the front or rear of a cabinet, the doors and
ventilated rear panels can be hung to open either to the left or the right.
1. Insert the two hinge location bushes into the front or rear frames
and position the door using the sprung hinges.
2. To remove the door simply pull the sprung hinge back from the
location bush and lift out.
Gland plates
1. The split bottom gland plates are secured in the base of the cabinet
by the M4x8 taptite® screws.
19" panel mounting kit for 800x800 racks (see figure 3)
1. Fasten the vertical mounting brackets to the top and bottom, front
and rear frames using the M5x10 pozidriv™ screws and M5 captive
nuts.
2. Fasten the adjustable depth members to the vertical mounting
brackets using the M5x8 pozidriv™ screws, M5 washers and M5
zinc nuts.
3. Fasten the panel mounts to the adjustable depth members using the
M5x10 pozidriv™ screws and M5 captive nuts.
4. Fasten the two remaining adjustable depth members to the panel
mounts in a central position. This will strengthen the mounts to
prevent twisting.
Shelves and chassis supports
Shelves and chassis supports bolt directly to the panel mounts using
the M6x12 pozidriv™ screws and M6 caged nuts provided.
® Taptite is a trade mark of Continental Screw Co. Ltd.
™ Pozidriv is a trade mark of European Industrial Services Ltd.
Note: Load carrying capacities
The maximum load carrying capacities for the cabinets is as follows:-
12U
600x600
16U
600x600
21U
600x600
27U
600x600
33U
600x600
40U
600x600
40U
600x800
40U
800x800
45U
600x600
45U
600x800
RS Components shall not be liable for any liability or loss of any nature (howsoever
caused and whether or not due to RS Components' negligence) which may result
from the use of any information provided in RS technical literature.
40U
40U
45U
600x800
800x800
600x600
582-158
582-164
852-873
582-215
582-215
852-895
582-350
582-366
852-918
582-300
582-316
852-924
582-259
582-265
852-930
582-417
582-423
582-401
582-388
582-394
582-372
582-603
582-603
852-952
582-546
**
852-946
582-502
582-502
582-495
582-473
582-489
582-467
582-445
582-451
582-439
582-552
582-552
582-552
582-568
582-568
582-568
-
582-704
-
140kg
150kg
175kg
200kg
250kg
300kg
300kg
300kg
325kg
325kg
V8830
45U
600x800
852-889
852-902
852-918
852-924
852-930
582-417
582-388
852-952
852-946
582-502
582-473
582-445
582-552
582-568
-
3
Publicidad
