Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Nightstick flashlights and headlamps are available at BrightGuy.com - an authorized distributor
Instruction Manual
NSP-4608BC
THANK YOU FOR SELECTING THE NIGHTSTICK NSP-4608BC!
SAVE THESE INSTRUCTIONS
Please read these instructions before using this product. They include
important safety and operation information.
WARNINGS
y NOT FOR USE ABOVE HAZARDOUS LOCATIONS
y DO NOT use in explosive atmospheres, near flammable liquids, or where
explosion proof lamps are required.
y DO NOT use in the proximity of vehicles or equipment when there is a risk
of flammable liquids coming into contact with the flashlight.
y DO NOT expose the batteries to water or salt water, or allow the batteries
to get wet.
y DO NOT store the batteries with metallic objects that may cause a short
circuit.
y Immediately discontinue use of the batteries if they emit an unusual smell,
feel hot, change color, change shape or appear abnormal in any way.
y Keep out of the reach of children.
INSTALLING BATTERIES
y Unscrew the battery compartment door on the back of the headlamp.
y Insert the batteries per the outline inside the battery compartment.
Observe the correct polarity of the batteries.
y Close the battery door and fasten the battery compartment door screw.
y The headlamp is now ready for use.
OPERATION
THE NSP-4608BC HAS TWO BUTTONS THAT CONTROL LIGHT
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.mynightstick.com
OUTPUT:
LIGHTING MODES
Pressing the Spotlight Button will turn on the spotlight. Pressing the
Floodlight Button will turn on the floodlight. Pressing both buttons will turn on
both the Spotlight and the Floodlight. This mode is called Dual-Light.
EACH BUTTON HAS TWO BRIGHTNESS SETTINGS
y High-brightness - Press the desired button once
y Low-brightness - Press the desired button a second time
y Pressing the same button a third time will turn that lighting mode off
THE NSP-4608BC HAS A TILT ADJUSTMENT FEATURE:
Simply adjust the tilt angle of the light to illuminate the desired area.
THE NSP-4608BC FITS ON ANY HARD HAT THAT HAS A HARD HAT
LAMP BRACKET ATTACHED.
TO ATTACH TO THE HARD HAT LAMP BRACKET
Slide the clip on the back of the NSP-4608BC into the slot on the top edge
of the Hard Hat Lamp Bracket and press down firmly until the clip is fully
engaged into the bracket.
TO REMOVE FROM THE HARD HAT LAMP BRACKET
Grasp the NSP-4608BC and pull up until the clip slides out of the Hard
Hat Lamp Bracket.
BAYCO PRODUCTS LIMITED LIFETIME WARRANTY
WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in
workmanship and materials for the original purchaser's lifetime. The Limited
Lifetime Warranty includes the LEDs, housing and lenses. Rechargeable
batteries, chargers, switches, electronics and included accessories are
warranted for a period of two years with proof of purchase. Disposable, non-
rechargeable batteries are excluded from this warranty. Normal wear and
failures which are caused by accidents, misuse, abuse, faulty installation and
lightning damage are also excluded.
In the event that Bayco Products, Inc. receives notice that any product
does not conform to its warranty, the original purchaser's sole and exclusive
remedy, and Bayco Products, Inc.'s sole and exclusive liability, shall be
for Bayco Products, Inc., at its sole option, to either repair or replace the
non-conforming product in accordance with this limited warranty.
original purchaser shall follow the instructions below to qualify for a repair
or replacement product. This is the only warranty, expressed or implied,
including any warranty of merchantability or fitness for a particular purpose.
IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES
OR SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS OF
THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING
NEGLIGENCE), STRICT LIABILITY OR OTHERWISE.
CUMULATIVE LIABILITY TO CUSTOMER, FROM ALL CAUSES OF
ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO AND
WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT PAID BY
CUSTOMER.
If this product is used for rental purposes, the warranty term is reduced to
90 days from the date of purchase.
WARRANTY CLAIMS – USA
Return the product to the place of purchase for all warranty related issues.
If this is not possible, contact Bayco Customer Service at (800) 233-2155
M-F 8-5 Central Time for a Return Goods Authorization (RGA). Do not return
this product to Bayco without first receiving an RGA Number from Bayco
Customer Service. When returning the product, the RGA Number must be
written on the outside of the shipping box.
WARRANTY CLAIMS – OUTSIDE OF USA
Return the product to the place where purchased for all warranty related
issues.
EXTENT OF COVERED WARRANTY WORK
Bayco will repair or replace this product at our option. If it is determined
that the warranty is no longer in effect, Bayco will contact you with a repair
estimate before beginning any work.
WARRANTY QUESTIONS
If you have any questions about this warranty or any other Bayco product
inquiries, please contact Bayco Customer Service at (800) 233-2155 M-F 8-5
INS-NSP-4608BC-16
The
THE TOTAL

Publicidad

loading

Resumen de contenidos para NightStick NSP-4608BC

  • Página 1 TO ATTACH TO THE HARD HAT LAMP BRACKET SAVE THESE INSTRUCTIONS Slide the clip on the back of the NSP-4608BC into the slot on the top edge Please read these instructions before using this product. They include of the Hard Hat Lamp Bracket and press down firmly until the clip is fully important safety and operation information.
  • Página 2 Date of Purchase _________________________________________ COMMENT ENLEVER LA LAMPE NSP-4608BC DU SUPPORT POUR LAMPE DU CASQUE DUR Saisir la lampe NSP-4608BC et tirer jusqu’à ce que l’attache glisse hors du support pour lampe du casque dur. GARANTIE LIMITÉE À VIE SUR LES PRODUITS BAYCO Mode d’emploi...
  • Página 3 1-800-233-2155 du lundi au vendredi de 8 heures à 17 heures, heure Deslice el clip en la parte posterior del NSP-4608BC en la ranura del normale du Centre. borde superior del soporte de la Linterna del Sombrero Duro y presione firmemente hasta que el clip esté...