Product Structure; Bluetooth Function - unotec NJOY Manual Del Usuario

Product structure

On/Off Switch

Bluetooth Function

1. Turn on the speaker. The blue LED will blink to indicate that it is searching
nearby devices. If the LED turns off, the speaker has not found any devices
to connect with.
2. Synchronise the speaker with the found device.
3. Use the Play/Pause button to start/stop the music.
4. Press - to select the previous song, hold to low the music volume.
5. Press + to select the following song, hold to rise the music volume.
Attention: when you want to synchronise the speaker with a different
device, disconnect it from the current active device.
Auxiliary Audio Function
1. Turn on the speaker.
2. Connect a microUSB cable (not included) to the rear input of the speaker.
Connect the other end to the audio playing device you want (computer,
smartphone, etc.)
3. Use the Play/Pause button to start/stop the music.
TF Function (Micro SD)
1. Insert the memory card with audio files into the back TF slot.
2. Turn on the speaker. The blue LED will blink to indicate that it is searching
nearby devices. If the LED turns off, the speaker has not found any devices
to connect with.
4 english
Charge / Aux
TF (Micro SD)
USB
Play / Pause
Vol & Track + / -