Auto-Reconnect; Volume Control; Calling; Answering A Call - LG Electronics HBM-290 Manual Del Usuario

Auto-reconnect

- If the HBM-290 is turned off (either accidentally or intentionally) while connected,
the headset will disconnect from the device.
The headset and phone will automatically reconnect when the HBM-290 is turned
back on (provided that both devices are within the required range of 30 feet (10
meters).
Out of range
- When the connected device and the HBM-290 are separated by a range of 30 feet
(10 meters) or more, the headset will alert the user with a beep, and the headset
and device will disconnect.
- When the device and the HBM-290 are within the required range again, the HBM-
290 will automatically reconnect to the phone.
- If the headset and device do not automatically reconnect when they are back within
the required range, briefly press the CALL button on the HBM-290 to reconnect
manually.
- While trying to reconnect, your headset will beep and the LED indicator will flicker
twice every 5 seconds.
- If the headset does not reconnect within 60 minutes, it will turn off.

Volume control

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
- There are eight levels of speaker volume.

Calling

Answering a call

- When there is an incoming call, the headset will ring.
- Briefly press the CALL button to answer the incoming call.

Making a call

- If you make a call from the connected phone, the call will (depending on the phone
settings) automatically transfer to the headset. If the call is not automatically transferred,
you can manually transfer the call by briefly pressing the CALL button on the HBM-290
(phone and headset must be paired).
How to use
7