Voice Dialing; Last Number Redial; Ending A Call; Transferring A Call - LG Electronics HBM-290 Manual Del Usuario

How to use

Voice dialing

- Briefly press the CALL button to activate "Voice dialing".
For best results, record the voice dialing tag through your headset.
NOTE: If your phone does not support voice dialing, this action may activate Last
Number Redial.

Last number redial

- Press and hold the CALL button for 1 second to activate "Last number redial".
The headset will beep and then call the last number dialed.
* Feature will not work if held for longer than 1 second. Release the button when you
hear the beep.

Ending a call

- Briefly press the CALL button.

Transferring a call

- While on a call on your phone, briefly press the CALL button to transfer the audio to the
headset (the headset and phone must be paired).
- To transfer a call from the headset to phone, press and hold the VOLUME UP button
for 3 seconds.

Call waiting

- Answer a second call without hanging up the first call by pressing and holding the
CALL button for 1 second (You will hear a beep). Press and hold the CALL button for 1
second to return to the original call.
- Briefly press the CALL button to end the active call or both calls at once. (subject to
phone support)

Call reject

- Activate call reject by pressing and holding the CALL button for 1 second when the
phone rings. Release the button when you hear the beep.
* These functions may only be used if your phone supports them.
For further information about using these features, please consult your phone's user
manual.

Mic mute

- Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for 1
second to mute/unmute the mic during conversation.
8