On/Off Button - Daikin BRC51A62 Manual De Instrucciones

1.8 DELAY TIMER Function
Press the DELAY TIMER key once will activate the delay timer function for 1 hour. An indicator
"OVERRIDE" will show on the LCD. Press the same key again will increase the setting to 2 hours.
An indicator "OVERRIDE" will be shown. Subsequent press will deactivate the delay timer function.
After the delay timer is completed, the delay timer function is deactivated and the logo is OFF. All
other timers will be resumed.
1.9 FAN Speed Function
Fan speed can be changed via pressing the FAN key:
Low > Med > High > Auto >
*FAN speed is not available in DRY mode.

1.10 ON/OFF Button

Starting Operation:
– Press the ON/OFF button, the LCD will show full display and the unit is turned on.
Stopping Operation:
– Press the ON/OFF button, the LCD will show real time clock only and the unit is turn off.
1.11 Power up Settings
The unit will start up with main board's last state setting during power up. If last state information is
not available, the unit will use the default settings. The default settings are as below:
Unit: Off
Mode: Cool
Fan Speed: High
RTC: 12:00AM, MONDAY
Swing: Off
Swing Mode: Standard
Timers: Disable
Turbo: Disable
Quiet: Off
Sleep: Off
Override: Disable
1.12 Real-time Clock (RTC) Display
RTC is shown on screen during the unit ON or OFF except for power failure or error code.
Set RTC Setting
1. Press RTC key one time will activate RTC setting mode. (Day will blink)
2. Press UP or DOWN to select the day.
3. Press RTC again to confirm the day. (Hour will blink next)
4. Press UP or DOWN to change the hour.
5. Press RTC again to confirm the hour. (Minute will blink next)
6. Press UP or DOWN to change the minute.
7. Press RTC again to confirm the minute.
RTC will only be set after all 7 steps, if there is no key operation for 5 seconds during setting the RTC,
it will automatically exits from setting mode and no changes will be made on the setting.
1.13 Key Lock
These key lock function inhibits any setting change. Press and hold both TURBO and QUIET keys
for 5 seconds will activate/deactivate the key lock function; "KEYLOCK" will be shown/disappear on
LCD. Upon all the keys are locked, only ON/OFF, TURBO and QUIET (to unlock) can be pressed.
All manuals and user guides at all-guides.com
3