Attaching The Connection Cable To The Mobileview Terminal; Removing The Back Cover - Rockwell Automation MobileView Instrucciones De Instalación

Attaching the Connection Cable to the MobileView Terminal

Removing the Back Cover

ATTENTION
!
1. Place the terminal on a stable, flat surface.
2. Remove the 6 screws that secure the back cover to the MobileView terminal.
3. Carefully lift off the back cover and place it on a secure surface.
Turn off the power supply before removing the back cover of
the MobileView terminal.
When the back cover is removed, the MobileView terminal is
sensitive to electrostatic discharge (ESD).
Back Cover
MobileView Connection Cable
Screws
Publication 2727-IN004C-MU-P
5