Kreg 500 Serie Manual De Usuario página 6

4
Optional: Mount the Dock Base to a Work Surface
If desired, you can mount the dock base to your work surface for added stability.
a. Place the assembled docking station (with or without the 500-Series Jig attached) in the
desired position on your workbench.
b. Drive one Kreg pocket-hole screw (1) through each of the four mounting holes (2) in the
dock-base platform (B).
Note You can use Kreg SML-C125 screws or any other Kreg pocket-hole screw.
6
2
B
1