Kreg 500 Serie Manual De Usuario página 9

3
Optional: Mount the Dock Adapters to a Work Surface
If desired, you can mount the dock adapters to your work surface for added stability.
a. Place the docking station (with the 700-Series Jig attached to it) in the desired position on
your workbench.
b. Drive one Kreg pocket-hole screw (1) through each of the four mounting holes (2) in the dock
adapters (D).
Note You can use Kreg SML-C125 screws or any other Kreg pocket-hole screw.
2
1
D
9